V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Position a screwdriver between the control module connector and its locking handle.
Turn the screwdriver to release the catch.
Continue pulling the locking handle outwards until the connector comes away from the control module.
Remove the control module from the bracket (2 screws).
Installation
Control module
Install in reverse order.
Finishing
Check that the heater functions according to Test running the additional heater / parking heater See: Testing and Inspection/Initial Inspection and
Diagnostic Overview.
Check that no diagnostic trouble codes (DTCs) have been stored while the repair was carried out.
