V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Installation
-
The wedge in the shaft
-
The adjustment rings
-
The felt spacer rings and the holder (the holder must be at exactly the same level as the sleeve). Use a drift and a cover.
Electromagnetic Clutch
Electromagnetic clutch
Special tools:
999 5597 Puller See: Tools and Equipment/999 5597 Puller
999 5596 Counterhold See: Tools and Equipment/999 5596 Counterhold
999 5598 Puller See: Tools and Equipment/999 5598 Puller
999 5599 Socket with ring See: Tools and Equipment/999 5599 Socket With Ring
999 5091 Drift front control arm bushing 240,260,X40 See: Tools and Equipment/999 5091 Drift Front Control Arm Bushing
999 5087 Socket See: Tools and Equipment/999 5087 Socket
999 5600 Socket with ring See: Tools and Equipment/999 5600 Socket With Ring
999 5604 Punch See: Tools and Equipment/999 5604 Punch
Preparations
Note! Do not disconnect and drain the AC-system.
Remove the multi-groove V-belt
Remove the splash guard. Disconnect the cables.
Disconnect the AC-hoses from the supports.
Remove the compressor (4x bolts) and suspend it by a steel wire.
In gasoline cars: note the extra support.
Remove the clutch disc