V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Removal
Remove the tailgate panel according to Tailgate panel .
Remove:
-
the 8 or 10 nuts
-
4-pin connector.
Press in the two clips (A) if possible. Carefully press the unit out of the tailgate.
Installing the tail lamp unit in the tailgate
-
Check the rubber gasket
-
Reinstall the unit in the tailgate and tighten the 8 or 10 nuts by hand
-
Check that the clips (A) are properly secured
-
Tighten the nuts. Tighten to 7.5 Nm. Start from the nut in the center
-
Reinstall the panel according to Tailgate panel .
Hint: Check and install the seal during assembly.
Check the function.
Tailgate Tail Lamp Unit
Tailgate tail lamp unit
Removing the tailgate tail lamp unit