V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Check the rubber and the spring inside. Replace if necessary.
-
Position the ignition coils. Press the ignition coils into place.
-
Tighten the screw. Tightening torque 10 Nm.
-
Connect the high tension cables.
-
Reconnect the connector.
NOTE: The "gray" connector is for the left coil (cylinders 2 and 3), the "blue" connector is for the right coil (cylinders 1 and 4).
-
Check the function.
-
Reinstall both engine covers.