V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Note! The pulley is left-hand threaded.
-
Clean the rotor shaft and the pulley
-
Install the pulley on the shaft
-
Screw the pulley (counter-clockwise) into place using counterhold 999 5760 Counterhold See: Tools and Equipment/999 5760 Counterhold.
Counterhold the rotor shaft using socket 999 5761 Socket See: Tools and Equipment/999 5761 Socket (Denso) or 951 2849 Twelve tooth spanner
M10 See: Tools and Equipment/951 2849 Twelve Tooth Spanner M10 (Bosch)
-
Tighten the pulley. Tighten to 80 Nm
-
Install the protective cover.
Checking the freewheel function (Poly v-belt removed)
Check the pulley freewheel as follows:
Rotate the pulley counter-clockwise and brake the pulley heavily.
The freewheel must grip the rotor shaft when it rotates counter-clockwise.
Stop the rotation.
When braking the pulley, the freewheel mechanism should must release so that the rotor shaft continues to rotate.
Installing the auxiliaries belt