V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Check that the brake disc and wheel rim mating surfaces are clean. Lubricate the hub center guide using installation paste (P/N 1161397). Install the
wheel. Tighten the nuts lightly.
Then tighten crosswise. Tighten to 110 Nm.
If an impact wrench is used, torque socket 951 2834 Torque socket 21mm S/V40 See: Tools and Equipment/951 2834 Torque Socket 21mm must be
used.
Post tighten the nuts by hand.
Caution! The correct torques and crosswise tightening are essential to avoid stresses in the brake disc.
Install the hub cap.
Tightening the lower control arm