V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Shift Cable: Adjustments
Adjusting the mechanical cable for the transmission
Adjusting the transmission cable
Move the gear selector to position R
Note! Ensure that the transmission cable can move freely in the engine compartment.
Setting R position
Push the lever on the gear-shift position sensor forward to position P.
Note! Do not move the transmission cable. The position of the transmission cable must not be altered.
Check P by trying to roll the car.
Move the lever to the next position, R.
Apply a little grease 1161241-3 to the lever pin.
Note! Do not change the position of the lever.
Installing the transmission cable