V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install:
-
the lever on the gear shift linkage rod.
Tighten to: 16 Nm
-
the transmission cable on the lever using a retaining clip. Apply a small amount of grease (P/N 1161241- 3) to the lever shaft journal.
If the transmission cable has been removed it must be adjusted. See Adjusting the mechanical cable for the transmission, AW55-50/51SN See: Shift
Linkage/Shift Cable/Adjustments.
Installing other components