V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
NOTE: Check the rear windshield rubber for damage.
Apply petroleum jelly to the inside of the rubber.
-
Install the wiper motor on the bracket (3 mounting screws). Connect the connector.
-
Install the wiper motor. Tighten the 2 inner mounting screws.
-
Install the blind cover plug.
-
Install the nut and cover.
-
Connect the connector.
NOTE: Switch on the ignition.
Check that the wiper motor is in the parked position.
Switch the rear windshield wiper on and off.
Switch off the ignition.
Installing The Wiper Mechanism