V50 L5-2.4L VIN 38 B5244S4 (2006)
Assembly
Assembling primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Assembling secondary lock
Press the secondary lock into place.
Connector, replacing
Special tools:
951 2639 Terminal removal tool See: Tools and Equipment/951 2639 Terminal Removal Tool
951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool
951 2812 Terminal removal tool See: Tools and Equipment/951 2812 Terminal Removal Tool
951 2633 Terminal removal tool See: Tools and Equipment/951 2633 Terminal Removal Tool
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Disassembly
Disassembling secondary lock
Press the secondary lock out from the cable side, for example using tool: 951 2633 Terminal removal tool See: Tools and Equipment/951 2633
Terminal Removal Tool or an electrician's screwdriver, as illustrated.
Disassembling primary lock