V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Install the bracket with the GPS antenna on the new amplifier. Tighten the bracket using the existing screw
-
Connect the connectors on the bottom of the amplifier
-
Install the amplifier on the studs
-
Install and tighten the three nuts. Tighten to 10 Nm (7.5 lbf. ft.).
-
Hook the side panel back into place using its clips
-
Reinstall the rubber strip in the boot lid opening
-
Reinstall the sill trim panel in the boot opening
-
Reinstall the upper floor supports if applicable
-
Reinstall the cargo compartment carpet.
-
Turn the ignition key to position II
-
Reconnect the battery negative lead.
Applies to all models
-
Program the function using VCT2000 in VIDA.