V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Ball holder
-
Ball
-
Spacer block (purchased separately)
-
Mounting screw, spare wheel (purchased separately)
-
High support for the floor in the cargo compartment (purchased separately)
-
Support for the floor in the cargo compartment (S40 only, purchased separately).
-
Remove the four screws (1) for the bumper cover. The screws are at the bottom/sides of the tailgate opening and at the bottom edge of the bumper.
Carry out on both the left and right-hand sides:
-
Remove the five screws (1) holding the bumper cover at the rear edge of the wing liner in the rear wheel arch.