V50 L5-2.4L VIN 38 B5244S4 (2006)
-
Cut out the text page in order to follow the illustrations and text at the same time.
Tow hitch, fixed
Preparations
-
Remove the four screws (1) for the bumper cover. The screws are underneath/on the sides of the tailgate opening and in the lower edge of the
bumper.
Carry out on both the left and right-hand sides:
-
Remove the six screws (1) holding the bumper cover at the rear edge of the wing liner in the rear wheel arch.
Carry out on both the left and right-hand sides:
-
Detach the end of the bumper cover by grasping it inside the wing liner and carefully pulling until the catches at the top edge release.