V50 L5-2.4L VIN 38 B5244S4 (2006)
-
The connector.
Caution!
Make sure that the rubber grommet is installed correctly.
Installing battery cable
Install the batteries negative cable, see VIDA:
Information > Repair> Removal, replacement and installation > 3 Electrical system> 30 General > 300 General > General> Battery, disconnecting
Set the clock.
Check functions.
Warranty Claim Information
S40, V50 MY04-06 Only
Corrosion in PDM/DDM connector due to water ingress via side mirror (S40, V50 MY04-06)
S40, V50 MY04-06 ONLY
DESCRIPTION:
Water ingress via the side mirror cable harness may cause corrosion in the DDM/PDM connector. As a result of this corrosion, functional problems
related to the door functions may occur. See photo shown above.
Chassis number ranges
SERVICE (S40, V50 MY04-06 ONLY):
If water ingress via the outer mirror cable harness is found, replace the cable harness. Also, carefully inspect the connector on the DDM/PDM for signs
of water ingress and/or corrosion (e.g. green oxidation). If any sign of water ingress and/or corrosion is detected, replace the DDM/PDM. See VIDA:
Information> Repair> Removal, replacement and installation > 8 Body and interior> 83 Doors and lids> Power window mechanism > Window lift
mechanism front side door, replacing
Information > Repair> Removal, replacement and installation > 8 Body and interior> 84 Exterior trim, glass, weatherstrips> Door mirrors> Power door
mirror, replacing