V50 L5-2.4L VIN 38 B5244S4 (2006)
Steering Mounted Controls Communication Module: Service and Repair
Steering wheel control module
Operation number: 64111-2
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Preparatory work
Important information
Caution! When a contract reel / steering wheel module (SWM) is removed and the same contract reel / steering wheel module is then
reinstalled, the contact reel does not need to be reset. Software does not need to be downloaded either.The above only applies on the condition
that the contact reel is fused while the work is being carried out. See: Steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service
and Repair
Caution! Ensure that the front wheels and the steering wheel module (SWM) are in the same position when removing as when installing, i.e.
pointing straight ahead.
Removing the battery leads, steering wheel and steering column covers
Ignition off.
Disconnect the battery negative cable. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Remove:
-
the steering wheel as described in Steering wheel See: Steering and Suspension/Steering/Steering Wheel/Service and Repair
-
the steering column covers. See: Panel steering column See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service
and Repair.