Electrical Door Malfunctions in V50 24L VIN 38 B5244S4 - Customer Interest TNN36-60
10.
Inside the passenger compartment, pull the harness through the A-pillar.
Secure both grommet flanges to the inner and outer walls of the A-pillar.
APPLIES TO C70 ONLY
CAUTION:
water ingress may result in instruction below is not followed.
The inner wall of the A-pillar on C70 has a double wall. The inner flange of the grommet should be fitted to the inboard cutout in the wall.
Make sure that the inner grommet flange is facing in the direction shown when installed.