V50 L5-2.4L VIN 38 B5244S4 (2006)
![background image](/volvo/v50/l5-2.4l_vin_38_b5244s4/Page-2010011.png)
-
the 1 clip
-
the screw.
Installing the upper control arm and the tie rod
Install the 2 screws. Do not tighten yet.
Note! The rear suspension must be in the normal position when tightening all the joints in the rear suspension where rubber bushings are
involved.
See: Normal position See: Service and Repair.
Tighten the screws according to Tightening torque See: Steering/Specifications.
Installing the shock absorber