V50 L5-2.4L VIN 38 B5244S4 (2006)
![background image](/volvo/v50/l5-2.4l_vin_38_b5244s4/Page-2011004.png)
Install the 3 clips.
Installing the clips for the brake cable
Install:
-
the 1 clip
-
the screw.
Installing the upper control arm and the tie rod
Install the 2 screws. Do not tighten yet.
Note: The rear suspension must be in the normal position when tightening all the joints in the rear suspension where rubber bushings are involved.
See: Normal position.
Tighten the screws. For tightening torques, See: Specifications.
Installing the lower control arm
Install: