V50 L5-2.4L VIN 38 B5244S4 (2006)
Remove the rubber lip placed in the glass clamp using bent needle-nosed pliers and pull out through rear hole of door module see illustration.
10.
Install the rubber lip (window regulator)
Install the new rubber lip through the hole in the door module and keep it in position by means of the pliers. Insert a long flat tool (e.g. cover for
manifold PN9995723) down between the inner and outer door plate see illustration.
Then press the rubber lip into position in the glass clamp.
Note!
Following information only applies to the side window. It does not apply to the inner door panel and door mirror.
Reinstall the front side window see VADIS/VIDA:
Removal replacement and installation
Body and interior
Exterior trim components glass weather strips
Glass of side doors and windows
Window front side door replace.
