volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Antenna - Keyless Entry|Service and Repair|Page 19673 > < Diagram Information and Instructions|Page 19668
Page 1
background image

Antenna - Keyless Entry: Service and Repair

Antennas keyless vehicle module (KVM)

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparatory work

Ignition off

Ignition off.

Hint: There are a total of eight antennas. Four are positioned along the center of the vehicle and four in the door handles.

Note! To replace the antennas in the door handle, see: Handle outer door front See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Handle/Front Door Exterior Handle/Service and Repair  and  Outer handle, rear door 
See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Handle/Rear Door Exterior Handle/Service and Repair

Method content

This method consists of:

-

replacing

-

replacing 

-

replacing

-

replacing

Antenna keyless vehicle module (KVM) front, replacing

Removing the front antenna keyless vehicle module (KVM) 

Remove:

-

the center console. See: Floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console.

-

the 2 x nuts

-

the antenna

Antenna - Keyless Entry|Service and Repair|Page 19673 > < Diagram Information and Instructions|Page 19668