V50 L5-2.4L VIN 39 B5244S7 (2005)
-
Pry up the cover on the mounting over the right-hand side window in the cargo compartment. Remove the screw underneath.
Removing the grab handle from the rear door:
-
Hold down the grab handle over the right-hand rear door. Pry off the cover for the screws. Use a small screwdriver. Remove the screws
-
Carefully pull off the handle (some force is required).
Note! Do not damage the headlining.
Lowering the headlining:
-
Turn the clip in the centre of the headlining 90°. Remove the clip
-
Remove the rubber strips at the top of the right-hand rear door
-
Carefully lower the headlining.
Note! Care is required to prevent the headlining breaking in its mountings further forwards.
-
Hang up the headlining at the rear edge if necessary.
Installing the sensor:
1.