volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Engine Controls - ECM DTC's 2110/2210|Page 21233 > < Engine Controls - ECM DTC's 2110/2210|Page 21231
Page 3
background image

-

Turn the ignition key to position 0.

-

Remove the ignition key from the ignition switch.

Note! Wait at least five minutes before disconnecting the connectors or removing other electrical equipment.

Detach the panel at the rear edge of the centre console:

-

Use a plastic weatherstrip tool to pry loose the panel. The panel is secured by a catch on each short side.

-

Move the panel to the side to access the two screws underneath.

Engine Controls - ECM DTC's 2110/2210|Page 21233 > < Engine Controls - ECM DTC's 2110/2210|Page 21231