V50 L5-2.4L VIN 39 B5244S7 (2005)
Note! Before disconnecting the connector, pull it forwards and secure in parking position (1). Otherwise the connector may fall into the door
and be difficult to retrieve.
Remove:
-
the connector
-
the handle.
Installation
Installing the outside handle front side door
Install:
-
the connector (only vehicles with KVM). Disconnect the connector from the stationary position so that it enters the door
-
the rubber seal
-
the handle
-
the lock cylinder
-
the screw for the lock cylinder. Tighten. See: Tightening torque See: Specifications
-
the cover in the end of the door.
Check the function of the handle.
