V50 L5-2.4L VIN 39 B5244S7 (2005)
Installation
Installing hood catch
Note! For tightening torques, see Tightening torque See: Specifications
Install:
-
the hood catch and the 2 M8 screws. Tighten
-
the connector
-
the cable on the hood catch
-
the airtight seal and the 3 plastic nuts. Tighten
-
the engine compartment panel together with the 2 M6 screws. Tighten
-
the air intake together with the 2 M6 screws. Tighten
-
the bumper cover. See: Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair