V50 L5-2.4L VIN 39 B5244S7 (2005)
Unhook the cable from the hood catch mechanism.
Remove:
-
the battery. See: Battery See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
-
the 3 M6 screws for the bottom of the battery box. Remove the battery box
-
the connector
-
the 2 clips securing the plastic cover in front of the power brake booster. Carefully fold the plastic cover forwards.
Note! Note the routing of the wire.
Remove the cable.
Installation
Note! For tightening torques, see Specifications. See: Specifications
Installing the mechanical cable
Insert the mechanical cable as noted previously.
Hook the mechanical cable into the hood catch and the hood catch control.
Install:
-
the soundproofing panel on the driver's side. See: Instrument panel lower See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Lower
-
the 2 clips
-
the bottom of the battery box
-
the connector
-
the 3 M6 screws. Tighten
-
the battery. See: Battery See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
-
the cover over the hood catch using the 2 screws.
Hint: Test the function before closing the hood.