V50 L5-2.4L VIN 39 B5244S7 (2005)
Install on both sides:
-
the 2 screws (1). Tighten acc. to Tightening torque See: Specifications/Mechanical Specifications/Steering and Suspension/Suspension/System
Specifications
-
the connector (2)
Tightening the upper link arm and track rod
Install a transmission jack under the lateral link. Press up the lateral link to the normal position. For the correct value in the normal position, see: Normal
position See: Steering and Suspension/Suspension/Service and Repair.
Tighten:
-
- screw, 1 pc., for the upper link arm. Tighten according to: Tightening torque See: Specifications/Mechanical Specifications/Steering and
Suspension/Suspension/System Specifications
-
screw, 1 pc., for the track rod. Tighten according to: Tightening torque See: Specifications/Mechanical Specifications/Steering and
Suspension/Suspension/System Specifications.
Installing the air baffle