V50 L5-2.4L VIN 39 B5244S7 (2005)
Seat Latch: Testing and Inspection
Collision protection unit from behind front seat check
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Method content
This method consists of:
-
Non-reclining seat
-
Reclining seat.
Non-reclining seat
Checking non-reclining seat
Run/push ahead the seat.
Raise the seat maximally at the trailing edge
Remove the screw on the inside at the side panel's leading edge (1).
Pull the side panel straight up at the trailing edge (2).
Fold aside the side panel.
Loosen the seatbelt from the seatbelt fitting by pressing in the catch.