V50 L5-2.4L VIN 39 B5244S7 (2005)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic unit brake system
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Secure the pedal in the depressed position. Use a pedal jack.
Remove the protective cap from the bleed nipple at the left front wheel. Install a plastic hose on the nipple. Open the bleed nipple. Collect the brake fluid
in a container.
Shut the bleed nipple.
