V50 L5-2.4L VIN 39 B5244S7 (2005)
-
the bumper shell. See:
^
Removal, replacement and installation
^
Bumper, mud flap
^
Bumper front, replacing
Note:
be sure to also disconnect front fog light wiring, if so equipped.
2.
Removal
Removing power steering pump
Disconnect the 2 electrical connectors.
Suck up the fluid in the reservoir. Use fluid evacuation equipment 951 2859.
Warning!
Be ready to catch all the fluid that runs out. Place a receptacle under the pump.
Remove:
-
the 2 hoses (1)
-
the pipe (2)
Caution!
Make sure that the pressure and return hoses are plugged.
4.
Remove:
-
3 screws
-
the power steering pump
5.
Remove the fluid reservoir and the hose to the power steering pump, by pushing up on the reservoir. Discard these pieces.