V50 L5-2.4L VIN 39 B5244S7 (2005)
Note! Handle the body sensor cluster (BSC) with care as it is sensitive to mechanical damage.
Remove:
-
the 2 screws for the bracket
-
the connector
-
the body sensor cluster (BSC).
Replace the sensor assembly together with the bracket.
Installation
Note! For tightening torques, see Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging
Installing body sensor cluster (BSC)
Install:
-
body sensor cluster (BSC)
-
the 2 screws for the bracket. Tighten. See: Tightening torque See: Specifications/Mechanical Specifications/Starting and Charging
-
the connector.
Installing panel and seat rail
Fold the carpet back into position. Slide the seat back into position.
Install:
-
the 4 M10 screws for the seat rails
-
the panels over the screws for the seat rails.
Finishing
Checking and adjusting
Perform calibration. See VIDA, Vehicle communication, calibration.
Turn on the ignition.