V50 L5-2.4L VIN 39 B5244S7 (2005)
Heater Core: Service and Repair
Heat Exchanger, L.H.D
Heat exchanger
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Draining coolant and removing the engine splash guard.
Remove:
-
the cover for the expansion tank and raise the vehicle
-
the engine splash guard.
Attach a hose on the nipple at the radiator and lower the hose to a container.
Open the nipple and drain off the coolant.
Lower the vehicle.
Detach the radiator hoses from the engine compartment.
Turn the radiator hose connection counter-clockwise to the end position and then pull off the radiator hose.
Removal
Remove:
-
the center console. Refer to: Floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console Floor
console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console.
-
the glove compartment. Refer to: Glove compartment See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and
Repair/Glove Compartment.
Detach the central electrical unit from its bracket but allow it to hang from the wiring. Refer to: Control module relay box passenger compartment See:
Maintenance/Fuses and Circuit Breakers/Relay Box/Service and Repair.