V50 L5-2.4L VIN 39 B5244S7 (2005)
Brake Light Switch: Service and Repair
Stoplamp switch
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Ignition off
Remove the soundproofing panel. See: Instrument panel lower See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Lower.
Removal
Removing the stop lamp switch
Note! The brake pedal must be in the rest position when the brake light switch is removed.
Turn the stop lamp switch clockwise until it releases from the bracket.
Remove:
-
the connector
-
the stop lamp switch.
Installation
Installing the stop lamp switch
Note! It is important that the brake pedal is in the rest position when the brake light switch is installed. The brake light switch self-adjusts on
installation.
Install:
-
the connector
-
the stop lamp switch.