V50 L5-2.4L VIN 39 B5244S7 (2005)
Turn Signal Switch: Service and Repair
Control stalk, left
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing the steering column covers
Remove the steering column covers. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
Removal
Removing the turn signal lamp switch
Remove the turn signal lamp switch together with the 2 screws (2)
Caution! The pins on the turn signal switch are fragile. Carefully pull straight out.
Installation
Installing the turn signal lamp switch
Caution! The pins on the turn signal switch are fragile. Carefully press the turn signal switches in the connectors. Check that the pins enter
correctly in the connectors.
Install the turn signal lamp switch using the 2 screws. Tighten.
Installing the steering column covers
Install the steering column covers. See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
