volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Campaign - A-Pillar Harness Connector Corrosion|Page 16324 > < Campaign - A-Pillar Harness Connector Corrosion|Page 16322
Page 7
background image

11.
Installing front door
Carefully lift the door into place.
Caution! Get help from a co-worker
during this step.
Install the screws to the hinges. Tighten to
24 Nm
Note! Do not tighten the screw for the
door-stop yet.

12.
Removing door panel
Remove the door panel, see:
Repair and installation
Section Interior
Upholstery for door, wall/side, hat shelf,
luggage shelf

Campaign - A-Pillar Harness Connector Corrosion|Page 16324 > < Campaign - A-Pillar Harness Connector Corrosion|Page 16322