V50 L5-2.4L VIN 39 B5244S7 (2005)
Disconnect the connector for the position sensor on the camshaft.
Remove:
-
the screw for the position sensor
-
the position sensor on the camshaft.
Installation
Note! For tightening torques, see Specifications. See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Torque
Installing the camshaft position (CMP) sensor
Install:
-
the position sensor on the camshaft
-
the screw for the position sensor. Tighten.
Connect the connector for the position sensor on the camshaft.
Installing upper intake manifold