V50 L5-2.4L VIN 39 B5244S7 (2005)
Knock Sensor: Service and Repair
Knock sensor (KS)
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing components
Remove the air cleaner (ACL) module. See: Air filter module See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
Removal
Removing the knock sensor (KS)
Remove:
-
the screws for the knock sensor (KS)
-
knock sensor (KS). Disconnect the knock sensor (KS) connector.
Installation
Note! For tightening torques, see Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical
Specifications/Tightening Torque
Installing knock sensors (KS)