V50 L5-2.4L VIN 39 B5244S7 (2005)
Transmission Temperature Sensor/Switch: Service and Repair
Temperature sensor fluid, transaxle, (TFT)
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Preparatory work
Removing components
Remove:
-
the transmission control module (TCM). See: Transmission Control Module (TCM) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Automatic Transmission Components/Transmission Control Module
(TCM)
-
the control system cover. See: Cover, control system See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Pan/Service and
Repair.
Removal
Removing the cable harness
Remove:
-
the connectors for the solenoid valves
-
the screw for the oil temperature sensor holder. Detach the sensor from the control system
-
the cable harness from the holders on the control system
-
the cable harness.
Installation
Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Starting and Charging
Checking the seal for the cable harness
Check that the seal for the cable harness connector is fault free and in position.
