Volvo Workshop Manuals
V50 L5-2.4L VIN 39 B5244S7 (2005)
Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Communications Control Module > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 267
Continue - Fault-tracing information
Checking communication errors car model S40 (-04) / V40
Hint: Test the communication with another corresponding vehicle to decide if the malfunction is in the vehicle or in VIDA/VCT/cable harness. If the
Hint: For current information about each circuit and signals, see wiring diagram and signal description for each system.
Check the voltage feed to diagnostic outlet #16. The voltage shall match battery voltage.
Check the cable for power ground and signal ground to diagnostic outlet #4 and #5.
Hint: When VCT2000 is connected to the diagnostic outlet (is supplied with voltage), the indicator diode shall be activated with a green light. Then the
Communication cables k-line
Check the communication cables between diagnostic outlet #7 and connected control modules for open circuit, short-circuit to ground and
Communication cable for cruise control as own system (not integrated)
Check the communication cable between diagnostic outlet #13 and cruise control for open circuit, short-circuit to ground and short-circuit to
|[PREV PAGE] [NEXT PAGE]|