Volvo Workshop Manuals
V50 L5-2.4L VIN 39 B5244S7 (2005)
Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Communications Control Module > Component Information > Testing and Inspection > Initial Inspection and Diagnostic Overview > Page 351
modules in the vehicle is that the driver information module (DIM) is active and can be communicated with. If communication is not possible with the
VCT2000 and cable harness
Connect VCT2000 to the vehicle so that it is supplied with voltage. Test VCT2000 by selecting the system's self-test and VCT Test in the VIDA
If no malfunctions were found after troubleshooting according to above, try with a new cable harness and/or new VCT2000.
If no malfunctions were found after troubleshooting according to above, try performing a complete system reset of VIDA.
Checking wiring and terminals See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals
|[PREV PAGE] [NEXT PAGE]|