Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V50 L5-2.4L VIN 39 B5244S7 (2005)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Signal Processing Module > Component Information > Service and Repair > Audio Module > Page 559

Page 2
background image

Remove:

-

the 3 M6 nuts

-

the control module.

Disconnect the connectors.

Note! If the vehicle is equipped with global positioning system module (GPS) (1), it must be transferred to the new audio module (AUD).

Installation

Note! For tightening torques, see Specifications. See: Specifications/Mechanical Specifications/Starting and Charging

Installing the audio module (AUD)

Note! Check that there is no dirt in the optical connectors.

The bend radius of the optic cables must not be less than 25 mm.

Install:

-

the connectors

-

the control module.

-

3 M6 nuts.

Install the cargo compartment side panel. See: Side panel loadspace See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Side
Panel Loadspace.

Finishing

Note! After replacing the audio module (AUD), new software must be ordered and programmed.

Ordering software

Order software. See: 30667195

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Signal Processing Module > Component Information > Service and Repair > Audio Module > Page 559

[PREV PAGE] [NEXT PAGE]