volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 47
background image

Alternatively use tool: 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool , see graphic.

Note! Tool 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool  can only be used for socket housings.

Assembly

Assembling primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Assembling secondary lock

Press the secondary lock into place.

Connector Type 3

Connector type 3

Special tools:

951 2630 Terminal removal tool  See: Tools and Equipment/951 2630 Terminal Removal Tool 
951 2631 Terminal removal tool  See: Tools and Equipment/951 2631 Terminal Removal Tool 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Disassembly

Disassembling secondary lock

Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 782

< PREV PAGE NEXT PAGE >