Volvo Workshop Manuals
V50 L5-2.4L VIN 39 B5244S7 (2005)
Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Diagrams > Diagram Information and Instructions > Page 1366
Release the cable from the cable harness so that you have plenty of room in which to work.
Note! The maximum permitted twinned length after splicing is 100 mm. This is to prevent interference problems.
Cut the cables so that there is approximately 40 mm between the splices (center to center) (A).
Strip off 5.0 mm of the insulation on the 4 cable ends. Use: 951 2620 Stripping tool See: Tools and Equipment/951 2620 Stripping tool.
Caution! Ensure that all the cores are twinned.
Crimping the sleeve
|[PREV PAGE] [NEXT PAGE]|