Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V50 L5-2.4L VIN 39 B5244S7 (2005)

Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Diagrams > Diagram Information and Instructions > Page 1432

Page 76
background image

Assembly

Assembling primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Assembling secondary lock

Press the secondary lock into place.

Connector, replacing

Special tools:

951 2639 Terminal removal tool  See: Tools and Equipment/951 2639 Terminal Removal Tool 
951 2637 Terminal removal tool  See: Tools and Equipment/951 2637 Terminal Removal Tool 
951 2812 Terminal removal tool See: Tools and Equipment/951 2812 Terminal Removal Tool 
951 2633 Terminal removal tool  See: Tools and Equipment/951 2633 Terminal Removal Tool 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Disassembly

Disassembling secondary lock

Press the secondary lock out from the cable side, for example using tool: 951 2633 Terminal removal tool  See: Tools and Equipment/951 2633
Terminal Removal Tool  or an electrician's screwdriver, as illustrated.

Disassembling primary lock

Relays and Modules > Relays and Modules - Power and Ground Distribution > Relay Box > Component Information > Diagrams > Diagram Information and Instructions > Page 1432

[PREV PAGE] [NEXT PAGE]