Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V50 L5-2.4L VIN 39 B5244S7 (2005)

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Accessory Control Module (AEM) > Page 1518

Page 1
background image

Body Control Module: Service and Repair
Control Module Relay Box Passenger Compartment

Control Module Relay Box Passenger Compartment

NOTE:  The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.

Preparatory work

Disconnecting the battery negative lead

CAUTION:  The driver information module (DIM) must not be replaced at the same time. This would erase the mileage.

NOTE:

-

Automatic alarms to the emergency services can be triggered if the vehicle is fitted with Volvo On Call.

-

Applies to 2005-. Check which mode global opening/closing is programmed in and make a note of it. See Vehicle communication, Programming
global opening/closing window.

Disconnect the battery negative lead.

Removal

Removing the passenger side soundproofing panel

Remove:

-

the 2 clips

-

the soundproofing panel. Pull straight down, then backwards.

Removing the central electronic module (CEM) / relay box

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Service and Repair > Accessory Control Module (AEM) > Page 1518

[PREV PAGE] [NEXT PAGE]