Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V50 L5-2.4L VIN 39 B5244S7 (2005)

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Emission Control Systems > Air Injection Pump Relay > Component Information > Diagrams > Diagram Information and Instructions > Page 1958

Page 50
background image

Assembly

Assembling primary lock

Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Assembling secondary lock

Press the secondary lock into place.

Connector Type 4

Connector type 4

Special tools:

951 2632 Terminal removal tool  See: Tools and Equipment/951 2632 Terminal Removal Tool 
951 2639 Terminal removal tool  See: Tools and Equipment/951 2639 Terminal Removal Tool 
951 2810 Terminal removal tool See: Tools and Equipment/951 2810 Terminal Removal Tool 
951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Disassembly

Disassembling secondary lock

Relays and Modules > Relays and Modules - Powertrain Management > Relays and Modules - Emission Control Systems > Air Injection Pump Relay > Component Information > Diagrams > Diagram Information and Instructions > Page 1958

[PREV PAGE] [NEXT PAGE]