V50 L5-2.4L VIN 39 B5244S7 (2005)
-
the 3 screws
-
the seat belt reel with the adaptive seatbelt force limiter.
Installation
Installing the adaptive seatbelt force limiter
Correctly align the seat belt reel.
Install:
-
the 2 x M10 screws. Tighten, see: Tightening torque See: Body and Frame/Specifications
-
1 screw. Tighten
-
the connector
-
the 2 x SRS ignition cables
-
the B-post panel. See: B-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Trim Panel
B-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Trim Panel.
Connect the battery negative lead. See: See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
