V50 L5-2.4L VIN 39 B5244S7 (2005)
Install the spring strut in the body using new nuts and the new screw. See: Tightening torque See: Specifications.
Install the wheel spindle on the spring strut.
Remove: 999 7088 Expander See: Tools and Equipment/999 7088 Expander.
Install the 1 screw. Tighten. See: Tightening torque See: Steering/Specifications.
Remove the 1 nut from the ball joint. Press down the control arm. Use: 999 7076 Lever See: Tools and Equipment/999 7076 Lever.
Install:
-
the drive shaft
-
the 1 screw for the drive shaft. Tighten. See: Tightening torque See: Steering/Specifications
-
the ball joint in the wheel spindle. Use:999 7076 Lever See: Tools and Equipment/999 7076 Lever
-
the 1 nut for the ball joint. Use an Allen key as a counterhold. Tighten. See: Tightening torque See: Steering/Specifications.
Installing the brake caliper
Install the 2 screws. Tighten. See: Tightening torque See: Brakes and Traction Control/Specifications/Tightening Torque.
Installing the anti-roll bar link from the spring strut
Install:
-
the anti-roll bar link
-
the M10 nut. Use an Allen key as a counterhold.
Finishing
Install the wheel. See: Wheels See: Wheels and Tires/Wheels/Service and Repair.
Check and adjust the headlamps in accordance with: Headlamps, adjusting See: Lighting and Horns/Headlamp/Adjustments/Headlamps, Adjusting
Headlamps, adjusting See: Lighting and Horns/Headlamp/Adjustments/Headlamps, Adjusting.