V50 L5-2.4L VIN 39 B5244S7 (2005)
Shift Cable: Adjustments
Gear selector cable, adjusting
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Positioning the vehicle
Ensure that the vehicle is on a level surface. The parking brake must not be applied.
Move the gear selector to position P.
Ignition off.
Adjustment
Adjusting the gear selector cable
Release the adjuster on the gear selector cable by sliding the spring-loaded sleeve forwards and pulling the lug up to the release position.
Press the lever forwards to the P position on the transmission (the foremost position of the lever).
Note! Check that P-position is activated by trying to roll the vehicle.