volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Metal Pedals|Page 10915 > < Metal Pedals|Page 10913
Page 5
background image

Note! Make sure that the end of the hose is secured higher than the level in the reservoir.

Removing the soundproofing panel

Remove the soundproofing panel on the driver's side in accordance with: Instrument panel lower See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Lower.

Removing the pedal position sensor

Note! Applies to vehicles with inner pedal position sensor

Remove the inner pedal position sensor in accordance with: Position sensor clutch pedal passenger compartment See: Powertrain
Management/Computers and Control Systems/Clutch Switch/Service and Repair  Position sensor clutch pedal passenger compartment, M56, M66 AWD,
M66, MMT6, MTX75, IB5 See: Powertrain Management/Computers and Control Systems/Clutch Switch/Service and Repair.

Removing the contact breaker for the immobilizer

Note! Applies to vehicles with immobilizer.

Remove the immobilizer in accordance with:.

Detaching the ball joint

Metal Pedals|Page 10915 > < Metal Pedals|Page 10913