V50 L5-2.4L VIN 39 B5244S7 (2005)
Install the pedal assembly into its location.
Fit the nuts, M8 x4. Tighten.
Installing the ball joint
Carefully press the ball joint into the pedal arm, check that both lock pins lock securely.
Installing the contact breaker for the immobilizer
Note! Applies to vehicles with immobilizer.
Install the immobilizer in accordance with:.
Installing the pedal position sensor
Note! Applies to vehicles with inner pedal position sensor
Install the inner pedal position sensor in accordance with: Position sensor clutch pedal passenger compartment, M56, M66 AWD, M66, MMT6,
MTX75, IB5 See: Powertrain Management/Computers and Control Systems/Clutch Switch/Service and Repair Position sensor clutch pedal passenger
compartment See: Powertrain Management/Computers and Control Systems/Clutch Switch/Service and Repair.
Installing the soundproofing panel
Install the soundproofing panel on the driver's side in accordance with: Instrument panel lower See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Lower.
Installing the clutch line
